News Search

FILTER:
Technology Transfer
Clear

News Comments Updated
1 2
The small-scale Microwave Mapping Transparency Sensor System is shown. The system was development by Compass Technologies Group under an Air Force Small Business Innovative Research agreement and loaned to the company through a Cooperative Research and Development Agreement with the Air Force Research Laboratory Materials and Manufacturing Directorate. (Photo courtesy of Compass Technologies Group) Air Force teams with industry to further aircraft and radome coating research
WRIGHT-PATTERSON AIR FORCE BASE, Ohio –The Air Force Research Laboratory and a small business are partnering to advance critical aircraft coatings. Under a cooperative research and development agreement, also known as a CRADA, the AFRL Materials and Manufacturing Directorate (AFRL/RX) loaned a small-scale Microwave Mapping Transparency Sensor
0 9/27
2017
A Northrop Grumman splice joint specimen is shown before (left) and after (right) undergoing testing in the 200 MTS Test Stand at the Facility for Innovative Research in Structures Technology in the Air Force Research Laboratory Aerospace Systems Directorate. The testing was conducted under a cooperative research and development agreement between the directorate and Northrop Grumman. (Courtesy Photo/AFRL) Air Force testing shows advanced joint technology a viable method for aircraft assembly
WRIGHT-PATTERSON AFB, Ohio – A partnership between the Air Force Research Laboratory and industry could help usher in a new era of advanced aircraft assembly. Testing performed by AFRL showed promising results for the use of composite skin splice joints in aircraft assembly. The tests were performed under a cooperative research and development
0 9/19
2017
Former U.S. Air Force Capt. Chris Perrine, Air Force Life Cycle Management Center, chief of acquisitions for net centric services-2, from Robbins Air Force Base, Ga., monitors his team’s active shooter detection system during the 2015 Air Force Research Laboratory Commander’s Challenge. Commander’s Challenge active shooter technology licensed by new small business
WRIGHT-PATTERSON AIR FORCE BASE, OHIO – A recently signed Air Force Research Laboratory patent licensing agreement is set to commercialize an active shooter alert system developed by the Air Force. The AFRL Sensors Directorate signed a patent license agreement with the newly incorporated Protective Innovations. The company, soon to be headquartered
0 8/23
2017
Students of Port St. Joe Middle School, in Port St. Joe, Florida were sponsored by the Air Force Civil Engineer Center at Tyndall Air Force Base, to participate in a FIRST LEGO League program in Biloxi, Mississippi. The funds were provided by the Department of Defense and delivered through an educational partnership agreement with Gulf County School District. Photo courtesy of Gulf County School District. AFCEC uses technology transfer agreements to provide STEM materials to local schools
TYNDALL AIR FORCE BASE, Fla. – The Air Force Civil Engineer Center, or AFCEC, has been working with Gulf County and Bay County school districts to advance science, technology, engineering and math programs and equipment for their students.Through educational partnership agreements, or EPA, with each district, AFCEC identified areas of need within
0 5/08
2017
Default Air Force Logo Air Force patent license could lead to natural fiber automotive components
AIR FORCE OFFICE OF SCIENTIFIC RESEARCH, VIRGINIA – The Air Force Office of Scientific Research signed a Patent License Agreement with Natural Fiber Welding, Inc. that allows the company to use an Air Force developed fiber welding process in the creation of automotive components.Air Force research showed that with proper solvents and control,
0 4/24
2017
Default Air Force Logo AFRL material transfer agreement leads to international research grant with Australia
WRIGHT PATTERSON AIR FORCE BASE, Ohio – A recent material transfer agreement between the Air Force Research Laboratory Materials and Manufacturing Directorate (AFRL/RX) and the Griffith University of Nathan, QLD 4111, Australia resulted in international cooperative research and development grant. The new agreement is between AFRL/RX, the Naval
0 4/10
2017
A small unmanned aerial system undergoes tests in the Acoustics Laboratory at Owens Corning Science and Technology Center in Granville, Ohio. The Air Force Research Laboratory 711th Human Performance Wing, Airman Systems Directorate, Battlespace Acoustics Branch and Owens Corning have entered into a Cooperative Research and Development Agreement to develop and understand best practices for measuring and labeling the sound produced by small commercial unmanned air systems.  (Courtesy photo / Owens Corning)
AFRL agreement aimed at protecting public from UAS noise
 WRIGHT-PATTERSON AIR FORCE BASE, Ohio - The Air Force Research Laboratory 711th Human Performance Wing, Airman Systems Directorate, Battlespace Acoustics Branch and Owens Corning have entered into a Cooperative Research and Development Agreement to develop and understand best practices for measuring and labeling the sound produced by small
0 4/07
2017
A test participant receives a 3-D full body scan at Bowling Green State University in Ohio. The participant is attempting to conceal an illegal object under their clothing through a simulated security checkpoint.  This research was possible through an educational partnership agreement between the Air Force Research Laboratory 711th Human Performance Wing and Bowling Green State University. The research focused on human biomechanics and 3-D motion analysis. A specific area of interest was the change of size, shape and motion when an individual has concealed objects in the torso. Results from this research are projected to improve defense and security processes for the military. (Image courtesy of Bowling Green State University) Air Force partnership with university enables 3D technology research
WRIGHT-PATTERSON AIR FORCE BASE, Ohio -- The Air Force Research Laboratory 711th Human Performance Wing signed an Educational Partnership Agreement with Bowling Green State University’s School of Human Movement, Sport and Leisure Studies due to a mutual interest in the areas of human biomechanics and 3D motion analysis.  An EPA is a type of
0 2/24
2017
The Hole-to-Edge Measurement Technology system performs a non-contact inspection. The HEMT was developed by Creare, LLC under an Air Force Small Business Innovation Research agreement. The technology and other equipment was temporarily transferred to Creare, LLC under a Cooperative Research and Development Agreement with the Air Force Research Laboratory Materials and Manufacturing Directorate. (Courtesy photo/Creare, LLC) AFRL agreement will further non-contact inspection method developments
WRIGHT-PATTERSON AIR FORCE BASE, OHIO – The Air Force Research Laboratory Materials and Manufacturing Directorate (AFRL/RX) recently signed a Cooperative Research and Development Agreement with Creare LLC in order to transfer hardware and software to the Hanover, New Hampshire company so that they can continue important research to develop
0 2/08
2017
A rendering of the future Vandenberg Launch Exhibit that will be installed at the Santa Maria Valley Discovery Museum in 2017. The exhibit is part of an Educational Partnership Agreement between the museum and the 30th Space Wing at Vandenberg Air Force Base, California. (Courtesy photo / 30th Space Wing) 30th Space Wing partners with Discovery Museum to create space launch exhibit
VANDENBERG AIR FORCE BASE, CA – The local community doesn’t always get to peek inside Vandenberg Air Force Base and see its role in launching and landing space vehicles. But for some of its younger residents, that’s about to change. A new educational partnership agreement between the 30th Space Wing and the Santa Maria Valley Discovery Museum is
0 2/03
2017
1 2
RSS